LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (ENGINE ASSEMBLY (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 10 Engine Assembly >> Assembly Mounts >> Engine Support, Removing And Installing >> Installing

Engine Support, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Install the bolt -2- before installing the engine support in the engine support opening.

-- Position the engine support and install the -1, 2, and 3- hand tight then to the tightening specification and sequence.

scientia non olet · About LEMON Manuals