Lock Cylinder, Removing And Installing: Notes
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Create an assisting tool from a wire hook as follows
-- Take a 1.5 mm diameter welding wire and bend the end to form an eye.
-- Then cut the welding wire.
- Dimension -a- = approximately 50 mm.
 Courtesy of AUDI OF AMERICA, LLC
|
-- File the end of the wire hook into a point.