Signature Lighting, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Left side: Remove the bumper cover. Refer to FRONT BUMPER COVER, REMOVING AND INSTALLING .
-- Right side: Remove the wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Disconnect the connector -2-.
-- Remove the bolts -arrows-.
-- Remove the signature lighting -1-.