Driver/Front Passenger Access/Start System Antenna -R134- / -R135-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the nuts -arrows- and press the underbody cover slightly downward.
-- For vehicles with high voltage system remove the center underbody panel. Refer to UNDERBODY TRIM PANELS, REMOVING AND INSTALLING .
-- Open the clip -2- in the direction of -arrow A- and remove the antenna -3- from the mount -1- in the direction of -arrow B-.
-- Disconnect the connector -4-.