Fuel Injector Seals, Removing And Installing

Special tools and workshop equipment required 

• Pliers : VAS 211 007  , not illustrated
• Torque Adapter: 3390 
  Fig 1: Identifying Torque Adapter 3390

  Courtesy of AUDI OF AMERICA, LLC

Procedure 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the corresponding fuel injector. Refer to FUEL INJECTORS, REMOVING AND INSTALLING .

-- Remove the seal -1- using the Pliers : VAS 211 007  -arrow-.

-- Install the new fuel injector seal with a suitable thrust piece, for example Torque Adapter: 3390  , and a short extension -1- all the way in from above -arrow-.

Fig 2: Identifying Torque Adapter And Short Extension

Courtesy of AUDI OF AMERICA, LLC