Camshaft Timing Chain, Removing From Camshafts: Notes
Special tools and workshop equipment required
- Torque Wrench 1332 40-200 Nm :VAG1332
- Torque Wrench 1332 Insert - Open Ring Wrench - 24 mm :VAG1332/9
- Locking Pin :T40071 (quantity: 2)
- Wrench - 21 mm :T40263
- Camshaft Lock :T40264
- Wrench - Camshaft :T40269
- Crankshaft Turning Tool :T40272
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Camshaft Adjuster to Camshaft