Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing
NOTE:
Follow all the rules of cleanliness. Refer to CLEAN WORKING CONDITIONS .
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
WARNING:
Fire hazards and risk of damage for a faulty engine cover.
- The engine cover must be always be installed before the hood is closed.
- The engine may neither be started nor driven without an engine cover.
Audi S6/S7
-- Disconnect the connector -2-.
-- Remove the bolts -1-, and remove the Charge Air Pressure Sensor -G31-.
Audi RS6/RS7
-- Disconnect the connectors -2-.
-- Remove the bolts -arrows- and then free up the Turbocharger Recirculation Valve -N249- with the air guide.
NOTE:
Ignore -1 and 3-.
-- Remove the bolts -arrows-, and remove the Charge Air Pressure Sensor -G31- -1-.