Connection Diagram - EVAP System
- Breather Line
- From EVAP canister to EVAP Canister Purge Regulator Valve 1 -N80-
- Fuel Tank
- Vent Line
- From fuel tank to EVAP canister
- Air Filter
- For the leak detection system
- Market-specific
- EVAP Canister
- Vent Line
- Breather Line
- To EVAP Canister Purge Regulator Valve 1 -N80-
- Fuel Tank Leak Detection Control Module -J909-
- With integrated Fuel Tank Pressure Sensor -G400-
- Country specific NAR
- Installed location: on the left side at the back of the underbody under the cover
- Checking in Guided Functions
see Vehicle Diagnostic Tester.
- Removing and installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING .
- EVAP Canister Purge Regulator Valve 1 -N80-
- Check Valve