Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing, Leather Cover Versions: Procedure
-- Separate the seat cover from the seat cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .
-- Cut the wire -2- directly from the old heating element -3-.
NOTE:
The old heating elements remain on the seat cushion -1-, -4- and will be covered over by the new heating elements.
-- Align the new heating elements on the seat cushion.
-- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.
-- Bond heating elements in the sequence -A, B, C, D and E- so that they align with the old heating elements and are wrinkle free.
-- Route the connecting wires to the individual heating elements in the base of the gaps.
Install in reverse order of removal.