Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Spark Plug Removal Tool: 3122B
- Puller - Valve Seal: 3364
- Seal Installer - Valve Stem: 3365 for valve stem seal with a simple sealing lip. Refer to Figure.
- Seal Installer - Valve Stem: T40376/1 , for valve stem seal with a double sealing lip. Refer to Figure.
- Valve Keeper Tool Kit: VAS5161A
- Valve Cotter Tool Kit - Punch: VAS5161/3A
- Guide Forks M6/M8 with Threaded Studs: VAS5161/5
- Retainer: VAS5161/6
- Valve Cotter Tool Kit - Assembly Cartridge: VAS5161/8A
- Knurled Thumb Screws M6: VAS5161/12
- Valve Cotter Tool Kit - Valve Insertion Device: VAS5161/18
- Valve Cotter Tool Kit - Guide Plate 19c: VAS5161/19C
- Valve Cotter Tool Kit - Adapter: T40012
- Mounting Sleeve. Refer to the parts information