Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the seals and O-rings after removal.

-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .