Cylinder Head, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Bung Set :VAS6122
- Hose Clip Pliers :VAS6362
- Polydrive Bit Drive Socket :T10070
- Wrench - 21mm :T40263
- Socket - Xzn 12 :T40270
- Adapter :T40314
- 24 mm Socket
CAUTION:
This procedure may contain mandatory replaceable parts. Refer to component overview prior to starting procedure.