Turbocharger, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Bung Set:VAS6122
CAUTION:
This procedure may contain mandatory replaceable parts. Refer to component overview prior to starting procedure.
If mechanical damage is found on the turbocharger, for example a destroyed compression wheel, it is not enough to just replace the turbocharger. To prevent subsequent damage, the following work must be performed:
- Check the air filter housing, the air filter element and the intake hoses for contamination.
- Check the entire charge air circuit and charge air cooler for foreign objects.
If foreign objects are found in charge air circuit, the circuit must be cleaned and the cooler replaced if necessary.