Overview - Charge Air Hose Connections: Installing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- If the seal is replaced, place it in the groove on the air duct hose.
- The seal must sit in the groove all the way around and must not be twisted.
-- Lubricate the sealing surfaces and the seal.
-- Bring the clip into the release position -1-.
-- Slide the air duct pipe into the connector all the way.
-- Bring the clip into the locked position -2- and press the air duct pipe back.
-- Check for correct seating and proper locking of the connector coupling by pulling on the air duct pipe.