Flywheel, Removing And Installing: Removing
CAUTION:
Danger Of Causing Damage To The Flywheel.
- Remove the bolts -B- by hand. Do not use an air-powered or impact wrench.
- When removing bolts, ensure bolt head does not come in contact with the flywheel.
- Turn the flywheel -A- until the bolts -B- line up with the holes -arrows-.
-- Mark the dual-mass flywheel to the engine.
-- Rotate dual mass flywheel -A- so bolts -B- are centered to holes -arrows-.
-- When removing the bolts -B- make sure the bolt head does not come in contact with the dual mass flywheel -arrows- which would be damaged if the flywheel is turned further.
-- Insert the :3067 into the hole on the cylinder block -B-.
-- Remove the dual mass flywheel.