LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> Q3 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft & Cylinder Block (Ea 888 Generation II) (2015 - 2016) >> 13 Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Balance Shaft, Removing And Installing, Exhaust Side >> Removing

Balance Shaft, Removing And Installing, Exhaust Side: Removing

NOTE:

The Exhaust Side Balance Shaft Must Be Replaced After Removal.

-- Remove the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REPLACING .

-- Remove the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- on the exhaust side balance shaft.

GWWA15-10467Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394/1  from the :T10394  .

GWWA15-10772Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394  and push the sliding sleeve in the direction of -arrow-.

GWWA15-10773Courtesy of AUDI OF AMERICA, LLC

-- Install the :T10055  into the :T10394  and remove the balance shaft.

GWWA15-10774Courtesy of AUDI OF AMERICA, LLC