Part I
Part II. Refer to Part II .
Part III. Refer to Part III .
Part IV. Refer to Part IV - 1.8L Engine Only .
- Turbocharger
- Can only be replaced with exhaust manifold and vacuum diaphragm.
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- To the EVAP Canister
- Vacuum Diaphragm
- For the turbocharger
- Can only be replaced with the turbocharger
- Hose
- Hose
- Bolt
- 3 Nm
- Wastegate Bypass Regulator Valve -N75-
- Hose
- Connection
- Clip
- Bolt
- 9 Nm
- O-Ring
- Always replace
- Turbocharger Recirculation Valve -N249-
- Installed position. Refer to the illustration below.
- Bolt
- 7 Nm
- O-Ring
- Replace
-- Note installation location -arrows-.