LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> Q3 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger & Supercharger (Ea 888 Generation II) (2015 - 2016) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, Removing And Installing >> Installing

Charge Air Pressure Sensor -G31-, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

-- Install the air guide, refer to the illustration as shown.

GWWA24-10997Courtesy of AUDI OF AMERICA, LLC