LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> Q3 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger & Supercharger (Ea 888 Generation II) (2015 - 2016) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

-- Remove the lock carrier cover and the bumper cover end plate. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING and LOCK CARRIER COVER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2014 .

-- Unclip the air guides -1 and 2-.

GWWA21-10642Courtesy of AUDI OF AMERICA, LLC

-- Remove the air guide hose from the charge air cooler by loosening the hose clamp -arrow-.

GWWA21-10643Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Remove the air guide hose from the charge air cooler by loosening the hose clamp -1-.

GWWA21-10233Courtesy of AUDI OF AMERICA, LLC

-- Push the lock downward in the direction of -arrow A- and move the charge air cooler upward slightly in the direction of -arrow B-.

-- Disengage the charge air cooler upward and remove it.