Left Seal, Replacing, AUDI A1: Removing

-- Remove the driveshaft. Refer to Overview - Drive Axle and Drive Axle, Removing And Installing .

-- Place the : VAS6208  under the rear final drive.

-- Turn the : T10037/1  or an M8 nut -arrow- on the thread for the : T10037  .

• : T10037/1  or M8 nut -arrow- seals flush with the beginning of the thread.

-- Remove flange shaft with : T10037  .

-- Pry off flange shaft seal with the : VW681  .