Overview - Automatic Head Lamp Range Control

Fig 1: Automatic Head Lamp Range Control Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. Left Front Level Control System Sensor -G78-
   • Component location: On the left front control arm
   • Removing and installing. Refer to Front Body Acceleration Sensor Bracket, Removing and Installing .
2. Left Headlamp Beam Adjustment Motor -V48-
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HID HEADLAMPS, VERSION 1, THROUGH MY 2014 .
3. Right Headlamp Beam Adjustment Motor -V49-
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING, HID HEADLAMPS, VERSION 1, THROUGH MY 2014 .
4. Glove Compartment
5. Headlamp Range Control Module -J431-
   • For vehicles without cornering lamp
   • For vehicles with cornering light with integrated Cornering Lamp and Headlamp Range Control Module -J745-.
   • Removing and installing. Refer to HEADLAMP RANGE CONTROL MODULE, REMOVING AND INSTALLING .
6. Bolt
   • 1.5 Nm
   • Quantity: 2
7. Connector
8. Left Rear Level Control System Sensor -G76-
   • Component location: on the left rear control arm
   • Removing and installing. Refer to Rear Body Acceleration SensorG343, Removing and Installing .