LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> Transmission >> Transmission System (Clutch - Service Information - 7-Speed Dual Clutch - 0CK, 0CJA, 0CLA, 0DN, 0DPA) >> 30 Clutch >> Clutch >> Input Shaft Seal, Replacing >> Removing

Input Shaft Seal, Replacing: Removing

CAUTION:

There Is A Risk Of Damaging The Clutch From Mishandling.

  • The shaft seal can only be replaced when the clutch is installed. Refer to Removing 

-- Pry out the shaft seal -arrow- carefully with the :T20143  .

GWWA30-10333Courtesy of AUDI OF AMERICA, LLC
NOTE:

Do not damage the contact surface on the shaft.

scientia non olet · About LEMON Manuals