LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Engine Assembly-CEUC, CRDB, CTGE, CWUB, CWUC) >> Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing >> Removing

Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .

-- Remove the bolt -1- and lower -2- for the transmission mount.

GWWA34-10649Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -5- and the bolt -6- and remove the transmission mount -3- from the transmission support -4-.