LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (Information And Entertainment Systems - THX Audio System) >> Removal And Installation >> Steering Wheel Controls - Navigator >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the steering wheel. For additional information, refer to Steering Column .

  1. 2.

    Detach the pushpin and position the steering wheel controls wiring harness aside.

  1. 3.

    Remove the 2 rear steering wheel controls bezel-to-steering wheel screws, the 2 front steering wheel controls bezel-to-steering wheel screws and remove the steering wheel controls bezel.

  1. 4.

    Disconnect the steering wheel controls electrical connector.

  1. 5.

    Remove the 2 screws from the steering wheel controls bezel and remove the steering wheel controls switch.

  1. 6.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals