LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Blind Spot Monitor System (Diagnostic Codes & Circuit Tests)) >> Blind Spot Monitor System >> DTC U0232: Lost Communication with Blind Spot Monitor Slave Module [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
scientia non olet · About LEMON Manuals