DTC C1ABB: Blind Spot Monitor Master Module Beam Axis Inspection Incomplete [08/2013 - ]: Description
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor LH.
HINT:
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1ABB | A beam axis inspection has not been performed. | Blind spot monitor sensor LH |