DTC C1626: Steering Angle Sensor Failure [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
1. Replace the spiral cable with sensor sub-assembly. Refer to REMOVAL [08/2013 - ] .
NEXT: Go to next step
CHECK DTC OUTPUT
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
  OK
  
  DTC C1626 is not output.
NG → See step 3

OK → END
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY. Refer to REMOVAL [08/2013 - ]