On-Vehicle Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PANEL RELAY
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher 3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(PANEL Relay)If the result is not as specified, replace the PANEL relay.
- Measure the resistance according to the value(s) in the table below.