DTC C2176/76: Receiver Error [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC OUTPUT (C2176/76)
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
2. Turn the power switch off.
3. Turn the power switch on (IG) and check for DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
  OK
  
  DTC C2176/76 is not output.
NG → See step 2

OK → END
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER. Refer to REMOVAL [08/2013 - ]