LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Dynamic Radar Cruise Control System (Diagnostics) (Introduction)) >> Dynamic Radar Cruise Control System >> DTC Check / Clear [08/2013 - ] >> DTC Check / Clear [08/2013 - ]

DTC Check / Clear [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC (Dynamic Radar Cruise Control System) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
    5. Check the DTCs.
  2. CHECK DTC (Hybrid Control System) 
    1. Refer to hybrid control system. Refer to DTC CHECK / CLEAR [08/2013 - ] .
  3. CLEAR DTC (Dynamic Radar Cruise Control System) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
    5. Clear the DTCs.
  4. CLEAR DTC (Hybrid Control System) 
    1. Refer to hybrid control system. Refer to DTC CHECK / CLEAR [08/2013 - ] .
scientia non olet · About LEMON Manuals