LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Lighting System (Exterior) (Service Information)) >> Side Turn Signal Light Assembly >> Inspection [08/2013 - ] >> Inspection [08/2013 - ]

Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH 
    1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
      Fig 1: Turn Signal Light Assembly LH Connector End View
      GTY320624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the side turn signal light comes on.

      OK

      The light comes on.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Side Turn Signal Light Assembly LH)

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH 
    1. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.
      Fig 2: Turn Signal Light Assembly LH Terminals
      GTY320624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the side turn signal light comes on.

      OK

      The light comes on.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Side Turn Signal Light Assembly RH)

      If the result is not as specified, replace the side turn signal light assembly RH.

scientia non olet · About LEMON Manuals