Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT HEADLIGHT CORD (for LH Side)

Disconnect the headlight cord (for LH Side).

Fig 1: Identifying Connector Terminal End Views (LH Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

Component without harness connected
(Headlight Cord (for LH Side))

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
A18-2 (LHT) - LVL-2*1	Always	Below 1 Ω
A18-3 (LHIG) - LVL-3*1	Always	Below 1 Ω
A18-4 (HI) - HIL-2	Always	Below 1 Ω
A18-6 (LHE) - LVL-1*1	Always	Below 1 Ω
A18-8 (E) - HIL-1	Always	Below 1 Ω

*1: w/ Headlight Leveling Motor

If the result is not as specified, replace the headlight cord (for LH Side).

INSPECT HEADLIGHT CORD (for RH Side)

Disconnect the headlight cord (for RH Side).

Fig 2: Identifying Connector Terminal End Views (RH Side)

TEXT IN ILLUSTRATION

Component without harness connected
(Headlight Cord (for RH Side))

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
A51-2 (RHT) - LVR-2*1	Always	Below 1 Ω
A51-3 (RHIG) - LVR-3*1	Always	Below 1 Ω
A51-4 (HI) - HIR-2	Always	Below 1 Ω
A51-6 (RHE) - LVR-1*1	Always	Below 1 Ω
A51-8 (E) - HIR-1	Always	Below 1 Ω

*1: w/ Headlight Leveling Motor

If the result is not as specified, replace the headlight cord (for RH Side).