LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A6 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Power Switch (Starting System) (Service Information)) >> Power Switch >> Installation [08/2013 - ] >> Installation [08/2013 - ]

Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL POWER SWITCH 
    1. Engage the 2 claws to install the power switch.
  2. INSTALL SWITCH BASE  . Refer to INSTALLATION [08/2013 - ] - Step 25
  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL  . Refer to INSTALLATION [08/2013 - ] - Step 29
  4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  . Refer to INSTALLATION [08/2013 - ] - Step 30
  5. INSTALL INSTRUMENT SIDE PANEL LH  . Refer to INSTALLATION [08/2013 - ] - Step 31
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  . Refer to INSTALLATION [08/2013 - ] - Step 31
  7. INSTALL COWL SIDE TRIM BOARD LH  . Refer to INSTALLATION [08/2013 - ] - Step 32
  8. INSTALL FRONT DOOR SCUFF PLATE LH  . Refer to INSTALLATION [08/2013 - ] - Step 33
  9. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (for Multi-Media Module Receiver Type) 

    Refer to INSTALLATION [08/2013 - ]

  10. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type) 

    Refer to INSTALLATION [08/2013 - ]

  11. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [08/2013 - ] .

  12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER  . Refer to INSTALLATION [08/2013 - ] - Step 3
scientia non olet · About LEMON Manuals