Installation [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
- Install the mass air flow meter sub-assembly with the 2 screws.NOTE:
Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.
HINT:
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly. Refer to INITIALIZATION [08/2013 - ] .
- Connect the mass air flow meter sub-assembly connector.
- Install the mass air flow meter sub-assembly with the 2 screws.