Installation [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SMOG VENTILATION SENSOR
- Install the smog ventilation sensor with the bolt.
Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
- Connect the connector.
- Install the smog ventilation sensor with the bolt.
- INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION [08/2013 - ] - Step 3