Without Marks in the Cylinder Head Cover

Courtesy of AUDI OF AMERICA, LLC

-- Turn the intake camshaft in direction of -arrow 1- until the marking -3- aligns with the :T40271/2  .

-- Slide the :T40271/2  into the chain sprocket splines in direction of -arrow 2-.

-- Turn the exhaust camshaft in direction of -arrow 1- until the marking -3- aligns with the :T40271/1  .

Courtesy of AUDI OF AMERICA, LLC

-- Slide the :T40271/1  into the chain sprocket splines in direction of -arrow 2-.

Continued for All Engines:

Courtesy of AUDI OF AMERICA, LLC

-- Turn the crankshaft on the hex fitting -2- to the "TDC point". The flat area -1- faces upward toward the cylinder head when in the "TDC point".

• In "TDC" point the flattened position -1- is in an imaginary vertical line between the camshaft sprockets.