Dual Clutch, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Shop Crane :VAS6100
- Dual Clutch Lifting Device :T40123A and Dual Clutch Lifting Device - Sleeve :T40123A/2
- Pressure Stand :T40099
- Guide Pins - Gearbox :T40288
- Engine Support Bridge - Additional Hooks (2 pc.) :10-222A/2
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Bolt - Dual clutch
- Bolt - Clutch slave cylinder
- Double shaft seal - Input shaft