Lower Timing Chain Cover, Replacing: Installing

• Replace the bolts that were tightened with an additional turn after removing them.
• Replace the lower timing chain cover and seal after removal.

-- Cover open engine components.

-- Remove any sealant residue on the cylinder block using a flat blade scraper.

-- Clean any oil or grease off the sealing surfaces.

-- Make sure both alignment bushings for centering the cover -arrows- are present.

Courtesy of AUDI OF AMERICA, LLC

• Be sure to check the expiration date of the sealant.

  Courtesy of AUDI OF AMERICA, LLC

-- Cut the tube nozzle at the front marking (nozzle diameter: approximately 3 mm).