Passenger Occupant Detection System, Removing And Installing: Notes

• Follow all safety precautions when working with pyrotechnic components (refer to SAFETY PRECAUTIONS ) and on the passenger occupant detection system (refer to PASSENGER OCCUPANT DETECTION SYSTEM DEACTIVATION ADDITIONAL SAFETY PRECAUTIONS, MARKET-SPECIFIC ).
• Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

The replacement part (service kit) for the passenger occupant detection system is already precalibrated and must not be separated under any circumstances. The service kit consists of:

• Passive Occupant Detection System Control Module -J706
• Passive Occupant Detection System Pressure Sensor -G452
• Passive Occupant Detection System Mat
• Seat cushion
• Wiring harness between the passenger occupant detection system control module -J706 and passenger occupant detection system pressure sensor -G452.