Rear Final Drive Assembly Overview: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing, refer to SUBFRAME, SERVICING
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Bolt
- 55 Nm
- Heat Shield
- Bolt
- 20 Nm
- Drive Axle
- Removing and installing, refer to DRIVE AXLE, REMOVING AND INSTALLING
- Rear Final Drive
- Removing and installing, refer to REAR FINAL DRIVE .
- Attaching to the assembly stand, refer to ATTACHING THE REAR FINAL DRIVE TO THE ASSEMBLY STAND .
- Driveshaft
- Removing and installing, refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE and DRIVESHAFT ATTACHED ON TRANSMISSION SIDE .
- Removing from the rear final drive and installing, refer to DRIVESHAFT FROM REAR FINAL DRIVE .
- Crossmember