Right Seal, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Lightly oil the new gasket on the outer edge.
-- Drive in the seal all the way without tilting using the :T40163 .
-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .
-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .