Right Flange Shaft, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is installed.
-- Remove the right drive axle. Refer to DRIVE AXLE .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE .
-- Place the :SMN372500 under the transmission.
-- Remove right flange shaft by fastening :T10037 to transmission housing -arrow-.