Right Flange Shaft, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
NOTE:
Replace the circlip after removing.
-- Insert the circlip -1- with the :VAS5503A .
-- Check the right flange shaft seal for damage and replace if necessary.
-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .
-- Insert the right flange shaft.
-- Fill the transmission fluid and check the fluid level. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .