Center Differential Ball Bearing, Replacing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Press Plate :VW401
- Press Plate :VW402
- Press Piece - Multiple Use :VW412
- Press Piece - Bushing - 50mm Diameter :VW432
- Bearing Installer - Carrier Bearing :3350
- Splitter :VAS251411
-- Remove the center differential housing. Refer to CENTER DIFFERENTIAL, REMOVING AND INSTALLING .
-- Remove the center differential -1- from the output shaft.
-- Removing the ball bearing from the center differential
A - :VAS251411
- The :VW432 faces the ball bearing.
-- Installing the ball bearing onto the center differential