Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Assembling
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Assemble in the reverse order of removal. Note the following:
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .
-- Install the spark plugs. Refer to OVERVIEW - IGNITION SYSTEM .
CAUTION:
Risk of damaging the valves and piston crowns after working on valvetrain.
- The motor must not be started for about 30 minutes after installing camshafts because the hydraulic lifters must seat themselves.