Sliding Bar Ball, Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Camshaft Spacer:T40191
INSTALLING
WARNING:
Risk of eye injury from balls popping out.
- Wear protective eyewear!
-- Insert the spring -1- in the camshaft.
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in the direction of -arrow A- using the :T40191/1 and hold.
-- Push the sliding bar -3- in the direction of -arrow B-.