Upper Timing Chain Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following:

NOTE:

Replace the seals and O-rings after removal.

-- Coat the seals and the O-rings with engine oil.

Seal installation position: Smaller inner diameter outward.

-- Install the camshaft adjustment valves. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205- / EXHAUST CAMSHAFT ADJUSTMENT VALVE 1 -N318-, REMOVING AND INSTALLING .

Additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA] .