LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A4 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1462 (Cylinder Head, VALVETRAIN [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA]) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Overview - Timing Chain Cover >> Lower Timing Chain Cover - Tightening Specifications And Sequence

Lower Timing Chain Cover - Tightening Specifications And Sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying 15 Bolt Timing Chain Lower Cover Bolt Tightening Sequence
GWWA15-10397Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts that were tightened with an additional turn after removing them.

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification/Additional Turn
1. -1 to 15- Install by hand all the way
2. -1 to 15- 8 Nm
3. -1, 2, 4, 5- and -7 to 15- 45° additional turn
4. -3 and 6- After installation of the vibration damper a 45° additional turn
scientia non olet · About LEMON Manuals