LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A4 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1462 (Cylinder Head, VALVETRAIN [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA]) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Bearing Bracket - Tightening Specifications And Sequence >> Notes

Bearing Bracket - Tightening Specifications And Sequence: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Loosening Sequence Of Control Valve
GWWA15-11860Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification
1. -1 to 6- Install by hand all the way
2. -1 to 6- 9 Nm
scientia non olet · About LEMON Manuals