Mounting Pins - Installation Position

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi S4, 2020 Audi A4, 2019 Audi S4, 2019 Audi A4, and 2018 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bearing Pins Installation Position

Courtesy of AUDI OF AMERICA, LLC

-- Coat the new O-ring -1- before installing with engine oil.

The alignment pin -arrow- for the bearing pins must engage in the hole in the cylinder block.

-- Coat the bearing pin with engine oil.